Riven Viisi® Prest® Brick

    9" x 12", 6" x 12", 6" x 9",
    3" x 9", 3" x 6"

    PCS PER CUBE: 48, 40, 48, 24, 32
    SF PER CUBE: 88.64
    SF PER TRUCK: 1329.6
    LBS PER CUBE: 2990

    Riven Prest® Brick replicates the look of stone with contoured sides and a face textured to simulate natural riven stone. Riven refers to the surface of flags, which is a natural bedding plane within the rock from which the flagstone is quarried.

    A natural riven surface is achieved by splitting blocks of stone, creating uneven surfaces with crevices and clefts. Because Riven Prest® Brick has a wider joint style, a quality Polymeric Sand is recommended for joint filling.




    ADDRESS: 500 Hanover Road, Hanover, PA 17331

    PHONE: (717) 637-0500

    EMAIL: info@hanoverpavers.com

    FAX: (717) 637-7145


    Sizes shown are nominal. Products are made to fit metric modules. Refer to the Technical Guide for additional size, color and packaging information. Riven Viisi® is designed to be installed randomly or in a non-repeating pattern. Hanover’s blended colors consist of several shades and will include some blended and some solid pieces.

    Please Note: Joints should be filled with a suitable polymeric sand which is specially formulated for the filling of wide joints when installing pavers. Unlike traditional sand, polymeric sand stays in place and remains stable; effectively resisting erosion caused by water, frost, wind, etc. Contact Hanover® for more information.

    Pavers with profiled tops are most susceptible to harm from plate compactors. These pavers have high and low points molded into the surface, which prevent the equipment from riding flat and subject the high points to potential scuffs. However, even smooth, flat surfaces can be harmed with improper usage or the existence of debris on the plate. To help minimize the scuffing of the profiled surface, it is important to have adequate sand on the surface prior to tamping. Hanover® recommends the use of a plate tamper with a rubber mat attachment.